Bradite Floor-it in action


Bradite have released a short video showing the application of its fast drying coating, Floor-it .

The video shows a typical domestic garage floor being refurbished.

Floor-it is a new single pack product that is re-coatable in just one hour. Formulated for use in light to medium-traffic situations it is ideal for factory walkways and general shop floor usage where speed of completion is a major consideration. The nearest competitor floor paints offer re-coating times of between 4 and 8 hours.

Floor-it is a high-performance ambient crosslinking water-based acrylic floor paint that has no odour. It is suitable for use internally or externally on appropriately prepared concrete, wood, metal, or asphalt floors. It can also be used on polyurethane, epoxy and chlorinated rubber coated floors.

The semi-gloss finish dries very hard with strong adhesion. Applied by either spray, brush or roller, it has a coverage, depending on the porosity of the substrate, of up to 11 square metres per litre.

“Floor-it builds on the successful launch last year of One Can,” says Bradite National Sales Manager James Burton. “It’s one hour re-coat time means that a job can be finished in a working day giving a tough surface that is easy to clean.”

Bradite recommends two coats of Floor-it for an existing floor or one thinned and two standard coats for a newly laid floor. Tests have shown that the tough finish can withstand so-called hot-tyre pickup where coatings can blister if driven over by a rubber-tyred vehicle.

Floor-it is available in a full range of Bradite Floor Paint colours; RAL, British Standard and NCS. And it can also be used with the company’s Low Slip Additives LS29 or LS30 to provide additional underfoot grip.

Bradite Floor-it in action
Click here to visit Bradite’s website

Pin It on Pinterest